Detectores de Fuga de Gases, Analizadores, Dispositivos de Alarma y Gases de Calibracion
HONEYWELL 10214
  • General
  • Caracteristicas
  • Especs
  • Relacionados
  • Literatura

Detector de fugas de Gas portátil Honeywell Manning EC-P2 con registro de datos y sensoresintercambiables para concentraciones de gas en el aire. Salida RS-232. Alarmas de flujo y de batería baja. Incluye cargador, estuche de almacenamiento y software de registro de datos

Solicitud de Información

The Manning EC-P2 is a portable, battery operated gas measuring and datalogging instrument with interchangegable sensors for the measurement of gas concentrations in ambient air.

The Manning EC-P2 is a complete portable gas measuring and data logging instrument including an interchangeable target gas selective electrochemical sensor, primary and secondary batteries, charger, storage case, datalogging software and RS-232 output cable. The backlit LCD display shows gas concentration reading in real time.

Gas concentrations are measured by an electrochemical Smart-Cell which has internally stored gas calibration data. The sensors can be exchanged quickly and easily without the need for calibration.

FEATURES

  • Datalogging capability can import into Excel spreadsheet
  • Sampling mode for capturing readings in a controlled, readable manner
  • RS-232 output of stored gas values
  • Optional analog output 0 to 1.0 VDC
  • 12,000 data points of memory
  • Rugged internal pump
  • Excellent accuracy and repeatability
  • Two adjustable concentration alarms, zero drift caution
  • Low flow and low battery alarms
  • Electrochemical sensors provide maximum sensitivity with minimal interference
  • Smart-Cell gas data retention
  • Primary power source is “C” alkaline battery has approximately 45 hours of runtime
  • Standby power source is a rechargeable NiCad battery that provides approximately 6 hours of additional runtime
  • Includes interchangeable target gas selective electrochemical sensors
  • Includes charger, storage case, and datalogging software
  • Includes RS-232 output cable
APPLICATIONS

  • Confined space entry
  • Fugitive emissions testing
  • Equipment and piping leak detection
  • Ambient air measurement
  • OSHA compliance measurements
  • Emergency HAZMAT response
  • Safety datalogging requirements

EC-P2 SPECIFICATIONS
Use Portable, battery powered instrument that uses interchangeable cells to measure a range of gases that has datalogging capability
Primary Power Alkaline C cell battery, approximately
45 hours continuous operation
Standby Power Internal rechargeable NiCad battery, 6 hours operation
Charger 120 VAC plug-in charger for internal standby battery (Optional 220 VAC charger available)
Display Backlit LCD
Pump Miniature internal diaphragm type, flow rate 0.5 SCFH
Alarms Two Concentration alarms, Zero Drift caution, Low Flow and Low Battery alarms
Standard Accessories Storage case, 10 in. (25 cm) extension wand, battery charger, filter material, datalogging software, RS-232 output cable (DB9 connector)
Optional Accessories Analog output cable, Cell Keeper for storage of additional Smart-Cells
Sensor Type Target gas selective electrochemical Smart-Cells
Accuracy Sensor dependent, but generally ± 5% of reading
Repeatability ± 1% full scale
Operating Ambient Temperature Range 0° to 120° F (-18° C to 49° C) (can operate for short periods at sub-zero temperatures)
Storage Temperature Recommend storing on the charger in an air-conditioned environment
Weight 1.8 lbs. (0.8 kg) (detector only), 5 lbs. (2.3 kg) (shipping weight)
Dimensions Approximately 3.5 in. x 5 in. x 8.5 in. (8.9 cm x 12.7 cm x 21.6 cm)
Outputs RS-232 output of stored gas values
Analog output 0 to 1.0 VDC (requires optional analog output cable)
Memory 12,000 data points, storage interval between points programmable at 1, 5, 10 or 15 minutes
Typical Memory Capacity 8 days at 1 minute storage intervals
Monitored gases
Gas Standard Range
Alcohol 0-500 ppm
Ammonia 0-500 ppm
Ammonia 0-2,000 ppm
Bromine 0-5 ppm
Carbon Monoxide 0-1,000 ppm
Chlorine 0-5 ppm
Chlorine 0-200 ppm
Fluorine 0-5 ppm
Formaldehyde 0-200 ppm
Hydrogen 0-2,000 ppm
Hydrogen Chloride 0-200 ppm
Hydrogen Peroxide 0-200 ppm
Hydrogen Sulfide 0-200 ppm
Nitric Oxide 0-500 ppm
Nitrogen Dioxide 0-200 ppm
Oxygen 0-25 %
Ozone 0-5 ppm
Sulfur Dioxide 0-500 ppm