Detectores de gas, analizadores, alarmas y gases de calibracion
GDS GDS-58NXP0/37-27-01/0-00-0/0 (1)
  • General
  • Detalles
  • Especs
  • Consumibles
  • Relacionados
  • Literatura

Sistema de muestreo GDS GDS-58NXP con cabeza sensora local de acero inoxidable configurado para Hidrazina (N2H4) con rango de 0-1 o 0-2ppm. Incluye bomba de muestreo, pantalla LCD de alta visibilidad a color QVGA TFT, salida de 4-20 mA y 4 relés de alarma Form C 5A, puerto Ethernet ModbusTCP RJ-45 con servidor web e interfaz esclava RTU RS-485 Modbus. Aprobado por CSA para ubicacionespeligrosas. Clase I Div 1.

Parte# con Opciones:        GDS-58NXP0/37-27-01/0-00-0/0
Precio con Opciones:        Favor de solicitar precio via Email   


Condicionamiento de Muestreo
(1) Condicionamiento de Muestreo para GDS GDS78-XP
(2) Rango para GM/EC (0-1 a 0-2)
Opciones de Montaje
(3) Placa de Montaje y Opciones de Gabinete para GDS GDS-58NXP
Opciones de Gabinete
(4) Opciones de Gabinete para GDS GDS58-XP
(5) Etiqueta para GM/EC
(6) Desagüe GDS-30 temporizado para 58XP, 58NXP o 58GP
Calentador de Gabinete
(7) Calentador de Gabinete para GDS 58XP, 58NXP o 58GP

  Tiempo de Embarque 3 Semanas  ]

The GDS-58NXP sample draw system is an ideal solution for applications where ambient conditions are unsuitable for traditional ambient sensors, or where access to an ambient sensor would be inconvenient or dangerous. The GDS-58NXP sample draw features the new GASMAX CX gas monitor with DigitalSensor technology and advanced Ethernet / MODBUS communications. Together with a fully integrated long-life brushless sample pump, adjustable flow meter and low flow warning switch, the highly reliable GDS-58NXP can monitor locations up to 500 feet away.

GASMAX CX Gas Monitor

The new GASMAX CX dual channel gas monitor supports new GDS Corp Digital Sensors for toxic and combustible gases as well as volatile organics and inert gases such as CO 2 . The high contrast full color graphic display shows system status, gas values, programmable tag name and engineering units under full daylight conditions. Unlike previous generation detectors with point LEDs, the GASMAX CX signals alarms by flashing the entire screen, making alarm indications clearly visible to operators and technicians. A menu-driven operator interface eliminates all analog potentiometers and allows setup and calibration without hazardous area declassification. An integrated Run / Calibrate valve and user prompted calibration procedure make routine maintenance and field ‘bump tests’ quick and easy.

Reliability in Hostile Environments

Utilizing a long-life brushless DC pump, the GDS-58NXP Sample Draw is suitable for installation in hazardous areas rated Class I, Div 1, Groups B, C & D.

The GDS-58NXP is ideal for sampling toxic or combustible gases in:

  • Sumps and enclosed areas
  • Cabinets or storeroom with limited ventilation or airflow
  • Air conditioning intake or exhaust plenums and ducts
  • Boiler burners and ducting

  • Single or dual channel - monitor both H2S and LEL simultaneously
  • Supports electrochemical, PID, catalytic bead and infrared sensors
  • High quality diaphragm pump with 24VDC brushless motor
  • Designed for use in Class I, Div 1 Hazardous Locations
  • High visibility color display flashes yellow or red on alarm
  • Setup in hazardous area requires only simple magnetic wand
  • Integrated flow warning switch for ultra-reliable remote operation
  • Built-in flow meter provides visual confirmation of sample flow rate
  • Standard RJ-45 Ethernet interface with built-in web server
  • Prompted calibration procedure and cal port for easy maintenance
  • Sample lines up to 500 ft in length with latency less than 4 minutes
  • Optional 4x alarm relays and dual serial MODBUS interface
  • GASMAX CX auto-configuration with DigitalSensor technology
  • Optional matching 110/220VAC power supply available
  • Manufactured in USA

Power Input: 24VDC +/- 5% at < 10 watts. Optional 110/220VAC power supply available in separate enclosure.
Display High visibility color LCD displays engineering units, alarm levels and trend data
Sensor Channel One Supports bridge-type sensors, electrochemical sensors and 4-20mA input devices such as the GDS-IR Infrared Sensor
Sensor Channel Two Supports electrochemical sensors and 4-20mA input devices such as the GDS-IR Infrared Sensor
Standard Output Single or dual 3-wire 4-20mA current source. Max loop R is 750 ohms with nominal 24VDC power supply.
10/100 Ethernet with MODBUS/TCP and web server
Optional Output Four Form C Relays 5A @ 30VDC / 240VAC Dual RS-485 2-wire MODBUS® interface
Sample Pump 1.6L diaphragm pump with brushless 24VDC motor
NOTE: Pump may not start at temperatures below 0°C Integral flow switch generates FAULT output on 4-20mA if flow blocked or pump fails
Temp 0°C to +55°C operating
Housing Aluminum housing with epoxy paint
#316 stainless optional
Dimensions 16” x 12” x 5” for sensor types 10 - 70, 10 pounds
16” x 15” x 5” for sensor types 110+, 14 pounds
Plate, 17” x 15”, for single detector
Plate, 21” x 17”, for dual detector or 110VAC supply
Inlet / Outlet 1/4” compression, stainless steel
Approvals GASMAX II CSA Certified for Class I, Div 1, Grps B, C, D.
Enclosure rated Class II, Div 2 Grps E, F, G.
Suitable for XP installations2
Warranty 2 years from date of purchase on electronics

    10-9827-R01 Sensor Electroquímico Inteligente configurado para Hidrazina (N2H4) con rango de 0-1/0-2 ppm. Para GDS GASMAX CX, GDS-58NXP, GDS-68XP, GDS-78XP. ..

    CYL-10320260-HDRZ Cilindro de Calibración Hidrazina (N2H4) 20 ppm de Ácido Cianhídrico (HCN). Balance Nitrógeno. Cilindro Portagreen de Aluminio 58 Litros DAL. ..

    C1/SM/0000/000000/00000 Controlador de Alarma GDsC1 Multipunto con 8 o 16 canales para aplicaciones de alarma y monitoreo. Puede configurarse con detectoresinalámbricos gasMAX. 5 RelésSPDT estándar y hasta 48 relésdiscretos. 1 o 2 tableros de 8 canales con salidasanalógicas de 4 ..

    C2QUAD-00-00000-0-0 Controlador de Alarma C2 Quad Multipunto para detectores de gas/ Transmisores con alarma de 4 canales y pantalla para monitoreo. Acepta o 4 4-20mA, 4 de puente, 2 mA y 2 de puente o dispositivos inalámbricos. Puede configurarse con detectores GASMAX. 2 Re ..

    SP-12 Sistema de energía solar GDS SP-12 de 12 vatios (1.0A) de alimentación continua para hasta 5 díascon condiciones de sol bajo, o 5 vatios para hasta un máximo de 10 díascon condiciones de poco sol. Incluye panel solar de 150W, gabinete con regulador de car ..

    SP-5 Sistema de energía solar GDS SP-5 de 5 vatios (430mA) de alimentación continua para hasta 5 díascon condiciones de sol bajo, o 3 vatios para hasta un máximo de 7 díascon condiciones de poco sol. Incluye panel solar de 80W, gabinete con regulador de carga ..

    20-0141 Kit de muestreo de Conducto GDS para detectores de gas GDS-58XP, GDS-58NXP y GDS-68XP ..

Opciones B2B: #Order de Compra, uso de cuenta de envio propia y compra exenta de impuesto
Opciones de Pago: Tarjeta de Credito, Tarjeta de Credito por Telefono, PAYPAL, Transferencia, Deposito, Cheque y Orden de Pago

Checkout with Paypal

> HIDRAZINA :    1 Articulos encontrados.

GDS  GDS-78XP0-37-027-01/0-0-0-0

Monitor de proceso GDS GDS-78XP con cabeza sensora local de acero inoxidable configurada para Hidrazina (N2H4) con rango 0-1, 0-2 ppm para aplicaciones en áreas peligrosas (Clase 1 División 1). Incluye monitor DC con salida de 4-20 mA, 3 relés de alarma y interfaz MODBUS. Disponible en gabinetes NEMA 4X de acero inoxidable y en gabinetes no metálicos.