Detectores de Fuga de Gases, Analizadores, Dispositivos de Alarma y Gases de Calibracion
SKU# (4979)

FIRERAY  3000-115

$2,679.00 Dls    Tiempo de Embarque: 3 Dias
 Solicitar Info/Cotizacion
 Costo del Flete
 Descuento por volumen



FIRERAY 3000-115
  • General
  • Caracteristicas
  • Especs
  • Relacionados
  • Literatura

Detector de Humo Fireray 3000 Exd a prueba de explosión e incombustible (de camino abierto) para la protección de áreasgrandes en atmósferasexplosivas. Incluye una unidad de control remoto con montaje para pared (IP54) y un Transmisor y receptor de infrarrojos (IP66). Rango de 5 a 100 metros. Relés de fuego y falla. Certificado ATEX para Clase I Div I Grupo 2.

Parte# con Opciones:        3000-115
Precio con Opciones:        2,679.00

Opciones:    

Conjunto extra
(1) Conjunto extra de Cabezas (RX & TX) para Liferay 3000 Exd

  Tiempo de Embarque 3 Dias  ]

The Fireray ® 3000 Exd is ideally suited for the protection of large areas, with potentially explosive atmospheres, against smoking fires. Fireray ® 3000 Exd comprises an infrared transmitter and a receiver, both of which are ATEX-certified for use in Class 1 Div 1 Group 2 hazardous areas. There is a separate, safe area, wall-mounted remote/low level control unit to allow adjustment and testing from a convenient non-hazardous location.

The product is designed for large enclosures within oil rigs, refineries, ordnance stores and similar premises. It provides an early warning of smouldering or strongly smoke-generative fires, which may not be picked up by flame detectors installed in many hazardous areas.

Features
  • Separate transmitter and receiver unit certified to Exd
  • Allows for 2 Detectors per System Controller
  • Range 5 to 100 metres, (16.4042ft to 328.084ft) configurable per set of Detectors
  • Integral Laser Alignment in Receiver
  • 2-wire Interface between Controller and Receiver
  • Separate Fire and Fault Relays per Detector
  • Remote/low Level Controller with LCD display (Safe Area)
  • Programmable Sensitivity and Fire/Fault delay
  • Automatic Gain Control (AGC) for drift compensation
  • First Fix concept for Transmitter, Receiver and Controller
  • Multiple cable gland knockouts for ease of wiring
  • Transmitter can be powered from Controller
  • Complies with ATEX and EN54:12
  • Light Cancellation Technology
Approvals:

The Fireray ® 3000 Exd complies with the ATEX directive.
II 2GD IP66: Ex d IIC T5 Gb / Ex tb IIIC T95°C Db

Operation

The Transmitter head emits a narrow beam of infra-red light to an associated Receiver head. Once smoke crosses through and thus obscures the IR beam path, the signal strength at the Receiver drops below a preset level which in turn results in an alarm condition.

The Fireray ® 3000 Exd has been designed so that it can be installed by one operator, with its laser assisted alignment method combined with easy to use alignment LEDs offering visual feedback. Integrated laser alignment aid can be activated at the Controller.

The Fireray ® 3000 Exd also has a feature which allows for the Transmitter to be powered from the Controller by wiring directly, thus reducing the number of power supplies required.

The low level Controller incorporates a LCD display, which offers a full icon-based, easy-to-use interface unit. This Controller enables ease of commissioning, testing and maintenance of the beam detection system. During commissioning the detector’s fire sensitivity thresholds can be selected, along with the user variable time to fire and time to fault settings.

The system is fully compliant with the requirements of RoHS and WEEE.

Fireray ® 3000 Exd
Operating Range: 5 to 100m (16.4042ft to 328.084ft)
Operating Voltage Range: 12 to 36V DC ±10%
Operating Controller Current (with 1 or 2 Receivers): 14mA (constant)
Operating Transmitter Current: 8mA (per Transmitter)
Power Down Reset Time: >20 seconds
Fire and Fault Relay Contacts: VFCO 2A @ 30 Volts DC resistive
Operating Temp. (non-condensing): -10°C to +55°C (14f to 131f)
Optical Wavelength: 850nm
LED Indications (Control Unit): Red = Fire
Amber = Fault
Green = System OK
LED Indications (Receiver): Alignment LEDs for single person alignment
IP Rating: IP54 (Controller)
IP66 (Transmitter/Receiver)
Relative Humidity (non-condensing): 93%
Parts List (System): 1 x Transmitter (clear lens)
1 x Receiver (dark lens)
1 x Control Unit
1 x Fixing Kit
2 x Brackets
Parts List (Additional Detector): 1 x Transmitter (clear lens)
1 x Receiver (dark lens)
1 x Fixing Kit
2 x Brackets
Housing Material (Controller): UL94 V2 PC
Housing Material (Transmitter/Receiver): Copper Free
Aluminium Alloy LM25, red
Housing Material (Bracket): Steel, red
Cable Gland Entries: 3 x 20mm
CPD Reference: 0786-CPD-21162

  • HUMO (TRAZADO ABIERTO) > A PRUEBA DE EXPLOSION
    3000-026 Conjunto Extra de cabezasFireray EXD para Fireray 3000 Exd. Incluye receptor (RX) y Transmisor (TX). Rojo. ..


Opciones B2B: #Order de Compra, uso de cuenta de envio propia y compra exenta de impuesto
Opciones de Pago: Tarjeta de Credito, Tarjeta de Credito por Telefono, PAYPAL, Transferencia, Deposito, Cheque y Orden de Pago

Checkout with Paypal

> A PRUEBA DE EXPLOSION :    2 Articulos encontrados.
3000-026
(4980)

FIRERAY  3000-026

Conjunto Extra de cabezasFireray EXD para Fireray 3000 Exd. Incluye receptor (RX) y Transmisor (TX). Rojo.



$2,425.92 Dls
30-3013
(5824)

NOTIFIER  30-3013

Detector de humo Notifier 30-3013 a prueba de explosión para incendios ardientes y en rápido crecimiento. Incluye salida de 0-20 mA, LED y alarma, relés Auxiliar y de falla. Caja de conexiones de aluminio IP44. Aprobado por FM (Clase 1 Div 1 y 2) y IECEx.



$4,845.00 Dls