Detectores de Fuga de Gases y Flama, Analizadores, Dispositivos de Alarma y Gases de Calibracion
SKU# (5958)


$1,615.50 Dls    Tiempo de Embarque: 2 Semanas
 Solicitar Info/Cotizacion
 Costo del Flete
 Descuento por volumen

PUREAIRE 99016 (1)
  • General
  • Caracteristicas
  • Especs
  • Literatura

Monitor de Deficiencia PureAire TX-1100-DRA Air Check O2 para Oxígeno (Difusión) con celda de zirconio. Incluye dos relés de alarma, pantalla LCD digital, salida 4-20mA y soportes de montaje en pared. Gabinete Nema 4X. Uso en interiores o al aire libre. Listado por CE y UL.

Parte# con Opciones:        99016
Precio con Opciones:        1,615.50


Fuente de Poder
(1) Fuente de Poder para PureAire AirCheck O2
Sirena y Luz
(2) Sirena y Luz para PureAire AirCheck O2
Pantalla Remota
(3) Pantalla Remota para PureAire AirCheck O2

  Tiempo de Embarque 2 Semanas  ]

  • 10 + Years no calibration sensor
  • Two-alarm relays for 19.5% and 18.0%
  • No maintenance required
  • Ultra loud built-in audible alarm 90 db
  • 3 Year warranty
  • Digital display, 4-20mA analog output
  • Low 450oC temperature zirconium oxide sensor
  • Operates in freezers at - 40 oC
  • No drift due to thunderstorms or barometric pressure changes
  • Wall mounting brackets
  • Optional plug in wall power supply
  • Ce approved EMC EN 61326-1:2006

The Air check O2 Deficiency Monitor is a compact gas monitoring system that’s ideal for the continuous monitoring of inert gas storage areas, freezers, confined spaces, and other locations where low oxygen levels may pose a hazard to personnel. Unlike electrochemical sensor cells the Air check O2 zirconium cell provides stable oxygen readings even in areas where temperature, barometric pressure and humidity levels are changing. The PureAire Air check O2 Deficiency Monitor is suitable for either indoor or outdoor use.

The heart of the monitoring system is a long lasting zirconium sensor, which responds to low oxygen conditions within seconds and provides accurate measurements over a wide temperature and humidity range. The zirconium O 2 sensor cell will operate continuously for 10 or more years and requires an absolute minimum of maintenance. There are no zero or span calibration pots to adjust and when compared to disposable type sensors, our long life zirconium O 2 sensor can save up to $475 annually and will pay for itself in just over 3 years!

Ideal for continuously monitoring oxygen levels in confined spaces or areas where inert gases are used, the Air check O2 Deficiency Monitor does not drift or loose sensitivity when the weather or temperature changes. The electronics are housed in a Nema 4X housing or optional EX for hazardous areas.

Connects to SCADA and PLC Controls

The Air check O2 Deficiency Monitor is 24VDC powered and transmits continuous oxygen concentration levels to any system control data acquisition system, or programmable logic controller.The PureAire’s Oxygen Deficiency Monitor can also be operated remote up to 1,000 meters or 0.6 miles from centralized controllers.

PureAire’s Oxygen Sensor Cell

The Air check O2 Deficiency Monitor uses an exclusive Current Limiting Zirconium Oxide Oxygen sensor that never requires a reference gas. Unlike concentration type zirconium cells that must have a reference gas, PureAire’s O2 monitor can be completely inserted into 100% nitrogen, argon and other oxygen depleting gases. Capable of detecting 0% up to 25% oxygen levels, the current limiting O2 sensor operates at a lower temperature than competitive concentration type cells. The average life of PureAire’s O2 sensor is over 10 years in most environments.

The Air check O2 Deficiency Monitor never needs calibration. The earth is a wonderful source of calibrated oxygen and under ambient levels; PureAire’s O2 monitor is continuously being challenged to 20.9%. There are no zero or span adjustments to make; the only optional response test required is to subject the O2 system to nitrogen periodically.

O2 Monitor System Features

The Air check O2 Deficiency Monitor is available in many different configurations. PureAire uses a sophisticated built-in CPU that is flexible to provide users with a low cost basic display only monitor or a full featured monitor with dual level, user selectable alarm relays. Other options available are Modbus digital communications or full Wireless radio communications.

Sampling Method & Range Diffusion, 0-25% O 2
Accuracy ± 1% of full scale
Operating Temperature -40 to + 55 C
Display 3⁄4” backlit LCD digital display
Sensor Type Long life zirconium oxide sensor cell (lower temp operation) No heat fatigue.
Sensor Life 10+ years under normal conditions
Signal Outputs Standard: 4-20 mA analog output
Optional: Dual User Selectable Relays (2amp 30VDC / 240VAC)
Audible alarm
Digital RS-232
Power Requirements 24VDC 100mA without relays; 500mA with relays
Dimensions 5.5 (W) x 10.5 (H) x 3.25 (D) inches; (140 x 267 x 83 mm)
Weight 1.6 lbs. (.8 kg)
Enclosure Nema 4X
Approvals Ce approval & factory calibrated against a NIST traceable reference standard
Required calibration None (no zero or span pots supplied)

Opciones B2B: #Order de Compra, uso de cuenta de envio propia y compra exenta de impuesto
Opciones de Pago: Tarjeta de Credito, Tarjeta de Credito por Telefono, PAYPAL, Transferencia, Deposito, Cheque y Orden de Pago

Checkout with Paypal Visa MasterCard Amex Checkout with Wire Transfer Electronic Payment

> OXIGENO LARGA VIDA :    2 Articulos encontrados.


Monitor de Deficiencia Remoto PureAire TX-1100-DRA Air Check O2 para Oxígeno (Difusión) con celda de zirconio. Incluye pantalla LCD digital y salida 4-20mA. Gabinete Nema 4X. Uso en interiores o al aire libre. Listado por CE y UL.


$1,705.50 Dls


Monitor de Deficiencia PureAire TX-1100-EXR Air check O2 para Oxígeno con celda de zirconio. Incluye pantalla digital y salida 4-20mA. Gabiente a prueba de explosiones para Clase 1, Div 1 y Div 2.


$3,055.50 Dls