Detectores de Fuga de Gases y Flama, Analizadores, Dispositivos de Alarma y Gases de Calibracion
SKU# (5959)

PUREAIRE  99019

$2,515.50 Dls    Tiempo de Embarque: 2 Semanas
 Solicitar Info/Cotizacion
 Costo del Flete
 Descuento por volumen



PUREAIRE 99019 (1)
  • General
  • Caracteristicas
  • Especs
  • Literatura

Monitor de muestreo PureAire TX-1100-SAM Air Check O2 para Oxígeno con celda de zirconio. Incluye pantalla digital y salida de 4-20 mA. Gabinete de montaje en pared Nema 4X. Uso en interiores o al aire libre. Listado por CE y UL.

Parte# con Opciones:        99019
Precio con Opciones:        2,515.50

Opciones:    

Alarma Audible
(1) Alarma Audible para PureAire AirCheck O2
Fuente de Poder
(2) Fuente de Poder para PureAire AirCheck O2
Sirena y Luz
(3) Sirena y Luz para PureAire AirCheck O2
Pantalla Remota
(4) Pantalla Remota para PureAire AirCheck O2

  Tiempo de Embarque 2 Semanas  ]

Features
  • Suitable for remote sampling to 100 feet
  • No maintenance Zirconium cell
  • No calibration required
  • 3 year warranty
  • No drift to environmental or temperature changes
  • 10 + year Sensor life
  • Local display
  • 4-20 mA analog output.
  • Built-in flow sample pump
  • Built-in user adjustable alarms & relays
  • Optional built-in audio horn

The Air check O2 Deficiency Monitor is a compact sample draw gas monitoring system that’s ideal for the continuous monitoring of inert gas storage areas, confined spaces, and other locations where low oxygen levels may pose a hazard to personnel. Unlike electrochemical sensor cells the Air check’s zirconium oxygen cell provides stable readings even in areas where temperature and humidity levels are changing. The PureAire Air check O2 Deficiency Monitor is suitable for either indoor or outdoor use.

The heart of the monitoring system is a long lasting zirconium sensor, which responds to low oxygen conditions within seconds and provides accurate and linear concentration readings over the entire measurement range. PureAire’s zirconium O 2 sensor cell will operate continuously for 10 or more years and requires an absolute minimum of maintenance. There are no zero or span calibration pots to adjust and when compared to disposable type sensors, our long life zirconium O 2 sensor can save up to $475 annually and will pay for itself in just over 3 years!

The monitor’s built-in pump is ideal for continuously monitoring oxygen levels in remote confined spaces or under floor areas where inert gases are used. The Air check O2 Sample Draw Monitor does not drift or loose sensitivity when the weather or temperature changes. The electronics are housed in a NEMA 4 general purpose wall mounted weather resistance housing.

Connects to DCS and PLC Controls

The Air check O2 Deficiency Monitor uses an exclusive Current Limiting Zirconium Oxide Oxygen sensor that never requires a reference gas. Unlike concentration type zirconium cells that must have a reference gas, PureAire’s O 2 monitor can operate in 100% nitrogen environments. Capable of detecting percent oxygen levels, the current limiting O 2 sensor operates at a lower temperature than competitive concentration type cells. The average life of PureAire’s O 2 sensor is over 10 years in most environments.

PureAire’s Oxygen Sensor Cell

The Air check O2 Deficiency Monitor uses an exclusive Current Limiting Zirconium Oxide Oxygen sensor that never requires a reference gas. Unlike concentration type zirconium cells that must have a reference gas, PureAire’s O 2 monitor can operate in 100% nitrogen environments. Capable of detecting percent oxygen levels, the current limiting O 2 sensor operates at a lower temperature than competitive concentration type cells. The average life of PureAire’s O 2 sensor is over 10 years in most environments.

The Air check O2 Deficiency Monitor never needs calibration. The earth is a wonderful source of calibrated oxygen and under ambient levels; PureAire’s O2 monitor is continuously being challenged to 20.9%. There are no zero or span adjustments to make; the only optional response test required is to subject the O2 system to nitrogen periodically.

O2 Monitor System Features

The Air check O2 Deficiency Monitor never needs calibration. The earth is a wonderful source of calibrated oxygen and under ambient levels; PureAire’s O 2 monitor is continuously being challenged to 20.9%. There are no zero or span adjustments to make; the only optional response test required is to subject the O 2 system to nitrogen periodically.

Specifications
Sampling Method & Range Sample Draw, 0-25%
Accuracy ± 1% of full scale
Operating Temperature -40 to +122F (-40 to +50C)
Display 3⁄4” backlit digital display
Sensor Type Long life zirconium oxide sensor cell
Sensor Life 10+ years under normal conditions
Signal Outputs 4-20 mA analog output
Dual level alarm relay contacts
Optional built-in horn
Power Requirements 24VDC 700mA
Dimensions 7.25 (W) x 6.0 (H) x 5.0 (D) inches; 184.2 mm x 152.4 mm x 127 mm
Weight 4 pounds (1.81 kg)
Enclosure NEMA 4X wall mount general purpose; not intended for explosive atmospheres.
Required calibration None (no zero or span pots supplied)


Opciones B2B: #Order de Compra, uso de cuenta de envio propia y compra exenta de impuesto
Opciones de Pago: Tarjeta de Credito, Tarjeta de Credito por Telefono, PAYPAL, Transferencia, Deposito, Cheque y Orden de Pago

Checkout with Paypal Visa MasterCard Amex Checkout with Wire Transfer Electronic Payment

> OXIGENO LARGA VIDA :    2 Articulos encontrados.
99021
(5961)

PUREAIRE  99021

Monitor de Deficiencia PureAire TX-1100-DRAP Air Check O2 para Oxígeno (Difusión) para Guantera y cámaras con celda de zirconio. Incluye pantalla LCD digital y salida de 4-20mA. Gabinete Nema 4X. Listado por CE y UL.

Configurar

$2,065.50 Dls
99035
(5962)

PUREAIRE  99035

Monitor de Deficiencia PureAire TX-1100-KF25 Air O2 para Oxígeno (Difusión) para cámaras de vacío con celda de zirconio. Incluye brida KF25, pantalla LCD digital y salida de 4-20 mA. Gabinete de policarbonato. Listado por CE y UL.

Configurar

$2,074.50 Dls