| GENERAL SPECIFICATIONS |
| Spectral Response | Single band IR 4.4-4.6 μm |
Detection Range
(at highest Sensitivity Setting for 1ft2 (0.1m2) pan fire) |
| Fuel |
ft / m |
| n-Heptane |
50 / 15 |
| Gasoline |
50 / 15 |
| Diesel Fuel |
37 / 11 |
| JP5 |
37 / 11 |
| Kerosene |
37 / 11 |
| Ethanol 95% |
25 / 7.5 |
| Methanol |
25 / 7.5 |
| IPA (Isopropyl Alcohol |
25 / 7.5 |
| Hydrogen** |
16/5 |
| Methane* |
16 / 5 |
| LPG * |
16 / 5 |
| Polypropylene Pellets |
10 / 3 |
| Office Paper |
20 / 6 |
* 20" (0.5m) high, 8" (0.2m) width plume fire
** 40/40L/LB only |
|
| Response Time |
Typically 5 seconds.
|
| Adjustable Time Delay | Up to 30 seconds
|
| Sensitivity Ranges | 2 ranges; 1 ft2 (0.1m2) n-heptane pan fire from 15 ft (5m) or 50 ft (15m)
|
| Field of View | Horizontal 90º; Vertical 90º
|
| Built-in-Test (BIT) | Automatic (and Manual)
|
| Temperature Range | Operating: -67ºF to +167ºF (-55ºC to +75ºC)
Option: -67ºF to +185ºF (-55ºC to +85ºC)
Storage: -67ºF to +185ºF (-55ºC to +85ºC)
|
| Humidity | Up to 95% non-condensing (withstands up to 100% RH for short periods)
|
| Heated Optics | To eliminate condensation and icing on the window
|
| ELECTRICAL SPECIFICATIONS |
| Operating Voltage | 24 VDC nominal (18-32 VDC)
|
| Power Consumption | Standby: Max. 90mA (110mA with heated window)
Alarm: Max. 130mA (160mA with heated window)
|
| Cable Entries | 2 x 3/4" - 14NPT conduits or 2 x M25 x 1.5 mm ISO
|
| Wiring | 12 - 22AWG (2.5mm 2 - 0.3mm 2)
|
| Electrical Input Protection | According to MIL-STD-1275B
|
| Electromagnetic Compatibility | EMI/RFI protected to EN50130-4
|
| Electrical Interface | The detector includes twelve (12) terminals with five (5) wiring options (factory set)
|
| OUTPUTS |
| Relays | Alarm, Fault and Auxiliary
SPST volt-free contacts rated 5A at 30 VDC or 250 VAC.
|
| 0-20mA (stepped) | Sink (source option) configuration
Fault: 0 +1mA
BIT Fault: 2mA ± 10%
Normal: 4mA ± 10%
Warning: 16mA ± 5%
Alarm: 20mA ± 5%
Resistance Loop: 100-600 Ω |
| HART Protocol |
Optional HART communication on the 0-20mA analog current (FSK) - used for maintenance, configuration changes and asset management
|
| RS-485 | RS-485 Modbus compatible communication link that can be used in computer controlled
installations
|
| MECHANICAL SPECIFICATIONS |
Materials
Enclosure options | - Stainless Steel 316L with electro polish finish
- Heavy duty copper free aluminum (less than 1%), red epoxy enamel finish |
| Mounting | Stainless Steel 316L with electro polish finish
|
| Dimensions | Detector 3.5" x 4.5" x 6.1" (90 x 114 x 156 mm)
|
| Weight | Detector (St.St.) 5.5 lb (2.5 kg)
Detector, aluminum 2.5 lb (1.2 kg)
Tilt mount 2.2 lb (1.0 kg)
|
| Environmental Standards | Meets MIL-STD-810C for Humidity, Salt & Fog, Vibration, Mechanical Shock, High Temp, Low Temp
|
| Water and Dust | IP66 and IP67 per EN60529, NEMA 250 6P
|
| APPROVALS |
| Hazardous Area |
| ATEX and IECEx |
Ex II 2 GD, |
|
| |
Ex de IIB+H2 T5 o (-5+55 ºCºC 7 |
x de IIB+H2 T4 (-55ºC to + 85ºC) |
| |
Ex tD A21 IP66/X7 T 95ºC |
Ex tD A21 IP66/X7 T 105ºC |
| FM / CSA |
Class I Div. 1, Groups B, C & D |
|
| |
Class II/III Div. 1, Groups E, F & G |
|
|
| Performance | EN54-10 (LPCB)
FM-3260 (FM)
|
| Reliability | IEC61508 - SIL2 (TUV)
|
| ACCESSORIES |
| Fire Simulator | 20/20-312
|
| Weather Protector | 777163 |
Laser Pointer
(Detector area coverage) | 777166 |
| Tilt Mount |
40/40-001 |
| Air Shield | 777161 |
) Reviews |
Write One
Newsletter
()