Detectores de Fuga de Gases, Analizadores, Dispositivos de Alarma y Gases de Calibracion
HONEYWELL 2110N2283
  • General
  • Caracteristicas
  • Especs
  • Consumibles
  • Relacionados
  • Literatura

Transmisor Honeywell Sieger Apex con certificación ATEX/INMETRO y kit para sensores de celda catalítica y electroquímicos, fuente aislada de 4 hilos de 4-20mA. Relés para Alarma 1, Alarma 2 y falla. Gabinete de Acero Inoxidable 316. Comunicación LonWorksopcional. Certificado para áreas inflamables y tóxicas, UK: ATEX (Ex II 2 G D). Lossensoresse venden por separado.

Solicitud de Información

Easy to Install

  • Sensor can be remotely mounted up to 100m from the transmitter
  • On board relays allow for local audible/visual alarms
  • Strong integral 316 STST mounting bracket
  • Large easy access cable entries
  • Easy access terminal blocks
  • Wide range of accessories
Easy to Use
  • Intuitive menu operating system
  • Clear on screen instructions guide user
  • Simple for button operation
  • Multiple language options
  • Transmitter recognizes new sensor cartridges
  • Easy to change gas types
  • Large clear backlit graphical LCD display
Easy to Maintain
  • Simple plug in under power sensor cartridge
  • Smart cartridges are supplied pre calibrated
  • Common transmitter for all gas types
  • Simple filter replacement
Typical applications include:

Petrochemical Exploration drilling rigs, production platforms, FPSO’s, oil and gas terminals, chemical plants, oil and gas tankers

Heavy Industrial

Steel manufacture, ship building

Manufacturing

Automotive, glass and ceramics, aerospace, printing and coating, cosmetics

Pharmaceutical

Research labs, solvent storage areas, process areas, demineralisation plants

Transmitter

The robust hazardous area approved Apex transmitter housing and mounting bracket is made from 316 Stainless Steel. It has a large backlit LCD display, simple 4 button operation, 3 fully configurable relay outputs and selectable sink, source or isolated 4-20mA signal. The transmitter is common to all types of sensor.

Sensor

The Apex Sensor can be mounted directly on the transmitter or remotely up to 100m away. There are two versions of sensor; one for both catalytic and electrochemical type sensor cartridges and one for the thick film (semi conductor) type cartridges.

Smart cartridge

The sensors can be fitted with a choice of over 40 toxic gas ranges and wide range of detectable flammable gases. Each cartridge is pre calibrated and simply plugs into the sensor. The Intrinsically Safe design allows cartridges to be changed with the unit under power. The transmitter recognizes a newly fitted sensor cartridge and automatically reads all the configuration information from it.

General Specification
Power supply 24Vdc nominal (18-32Vdc)
Power consumption (typical) Apex 3W toxic, 4.6W catalytic, 4.6W thick film
Relay outputs A1, A2 and Fault 2A at 30Vdc* selectable normally open or normally closed and normally energised or normally de-energised
Analogue signal output 4-20mA sink, source or isolated output
Digital output LonWorks (optional) – only available on ATEX certified version
Material and weight 316 Stainless Steel 5.25kg (11.55lbs)
Accuracy Baseline ±3%, at 50% FSD ±4%
Repeatability ±2% at 50% FSD
Linearity <5% FSD
Standard Output Standard dual 3-wire 4-20mA current source. Max loop R is 750 ohms with nominal 24VDC power supply
Response time (typical)
Catalytic
Toxic

T50 <5 seconds, T90 <10 seconds
T50 <12 seconds, T90 <30 seconds
Stability (typical)
Temperature:
Time:

<±5% FSD (zero), <±5% FSD (span)
<±3% FSD / year (zero), <±4% FSD / year (span)
Operating temperature -40°C to + 65°C (-40 to + 150°F).
Operating temperature of electrochemical cell cartridges is cell dependent. LCD display operates over -20°C to +65°C
Operating humidity 0-99% (non condensing)
Environmental protection IP66/67 to BS EN60529:1992 (Equiv. NEMA 4X / NEMA 6)
Approvals CE Approved to all applicable European directives. EMC EN50270: 1999 type 2
Performance standards Exam (DMT) EN50054/50057/50271. CSA C22.2 No.152 (with cartridge 2110B3754)
Certification ATEX II 2G EEx d ia IIC, CSA Class 1, Division 1 groups B, C and D C22.2 No.152
UL Class 1, Division 1 groups B, C and D, and Class 1, Zone 1 AExd [ia] IIC
ATEX and UL T4 -40 to +80°C (-40 to +176°F), T5 -40 to +55°C (-40 to +131°F)
CSA T4 -40 to +75°C (-40 to +167°F), T5 -40 to +55°C (-40 to +131°F) * CSA / UL rating 1A at 28Vdc
Available gases and ranges
Gas Formula Ranges Cell type
Flammable Various 0-100%LEL or 0-10%LEL CAT/TF
Ammonia NH3 0-50ppm, 0-100ppm, 0-400ppm or 0-1000ppm ECC/TF
Arsine AsH3 0-0.2ppm ECC
Boron trichloride BCI3 0-6ppm ECC
Bromine BR2 0-0.4ppm ECC
Carbon monoxide CO 0-100ppm, 0-200ppm or 0-500ppm ECC
Chlorine Cl2 0-2ppm, 0-5ppm or 0-15ppm ECC
Chlorine dioxide ClO2 0-0.4ppm ECC
Diborane B2H6 0-0.4ppm ECC
Dichlorosilane SiH2Cl2 0-10ppm ECC
Fluorine F2 0-4ppm ECC
Germane GeH4 0-0.8ppm ECC
Hydrogen H2 0-1000ppm ECC
Hydrogen bromide HBr 0-12ppm ECC
Hydrogen chloride HCl 0-20ppm ECC
Hydrogen cyanide HCN 0-20ppm ECC
Hydrogen fluoride HF 0-12ppm ECC
Hydrogen sulfide H2S 0-15ppm, 0-20ppm, 0-50ppm or 0-100ppm ECC/TF
Nitric oxide NO 0-100ppm ECC
Nitrogen dioxide NO2 0-12ppm ECC
Oxygen O2 0-21%V/V ECC
Ozone O3 0-4ppm ECC
Phosphine PH3 0-1.2ppm ECC
Silane SiH4 0-20ppm ECC
Sulfur dioxide SO2 aa 0-8ppm, 0-15ppm, 0-50ppm


  • DETECTORES DE GAS FIJOS > LEL CATALÍTICO (CATALYTIC BEAD)
    SPXCDULNFX Detector de Gas sensepoint Honeywell XCD de Celda Catalítica 0-100%LEL (Celda Catalítica) Metano CH4 (gasnatural) con cabeza sensora de acero inoxidable y gabinete LM25 de aluminio para el monitoreo de Combustibles LEL 20%-100%. Funciona tanto dentro de e ..