Detectores de Fuga de Gases y Flama, Analizadores, Dispositivos de Alarma y Gases de Calibracion
AMS A002410
  • General
  • Caracteristicas
  • Especs
  • ACCESORIOS & RELACIONADOS
  • Literatura

Sonda de gas AMS 3211-1500 en línea con sensor de dióxido de circón para la medición de Oxígeno (O2) y Monóxido de Carbono (COe). Tubo de acero inoxidable. IP65. Temperatura máxima: 400 °C.

Parte# con Opciones:        A002410
Precio con Opciones:        Favor de solicitar precio via Email   

Opciones:    

Unidad neumática
(1) Unidad neumática para AMS 3220 con sonda AMS 321x-500/1500/860
GFC Housing with window with built-in: Pressure reduction for reference air, Flowmeter with needle valve for reference air / cal. Gas, valves for manual actuation between the gases
Unidad neumática
(2) Unidad neumática para AMS 5200 con sonda AMS 321x-500/1500/860
GFC Housing with window with built-in: Pressure reduction for reference air, Flowmeter with needle valve for reference air / cal. Gas, valves for manual actuation between the gases
Purga Trasera
(3) Purga Trasera para AMS 3211-500/1500
For cleaning of the filter with heavy dust for use in Ex-free Zone

  Tiempo de Embarque 4 Semanas  ]

The Application:

Complex combustion systems and processes require besides a fast In-Situ O2- measurement to control the combustion, a quality measurement to adjust the combustion system at a level which avoids the generation of CO. The control level around the point of CO generation is the optimum of the combustion. AMS offers for this application the COe In-Line Flue gas probe AMS 3211-1500 with a dual sensor which allows the measurement of O2 and unburnt Hydrocarbons. The unburnt Hydrocarbons are measured as CO equivalent (COe). Due to the fast response of the dual sensor the plant control can make use of the additional control value COe. The COe In-Line Flue gas probe AMS 3211-1500 can be operated with the Transmitter AMS 3220. The Transmitters is available as Twin- Version to supply separate signals for O2 and COe. EN 14181 and EN ISO 14956.

The Measuring principle:

The Sensor of the COe In-Line Flue gas probe AMS 3211-1500 is made of a electrochemical solid electrolyte sensor of partially stabilised Zircon dioxide ceramic. The sensor has three electrodes:

  • O2-sensitive Platinum electrode
  • CO / H2-sensitive electrode made of Platinum / Precious metal alloy
  • Platinum reference electrode

The measurement of COe with the COe In-Line Flue gas probe AMS 3211-1500 is not a CO measurement in the classical sense. The Flue gas probe AMS 3211-1500 measures in-situ the concentration of the sum of all combustible (oxidising) flue gas components such as CO and H2. The result of the measurement is displayed as COe. In applications with a known fuel at a constant composition the true CO concentration can be determined within limits. The COe In-Line Flue gas probe AMS 3211-1500 can be used for the measurement of O2 and Coe in Natural gas, Fuel Oil # 4, Lignite and Hard coal. The measuring range of the component COe is 1000 PPMv. For a quality measurement this range is quite sufficient, since the main purpose of the measurement is to avoid the generation of Carbon Monoxide. Due to the physical dimensions the sensor for measurement of O2 and COe can also be utilised with all other flue gas probes of AMS.

The Measuring system:

Typically continuous Oxygen measuring systems are consisting of a Flue gas probe with built in Zircon dioxide sensor, a Transmitter and a Pneumatic unit. The Pneumatic unit supplies continuously instrument air to the Zircon dioxide sensor which serves as Reference air. Via a second gas inlet port at the probe flange the Zircon dioxide sensor can be supplied with calibration gas to verify and correct the calibration of the sensor in regular intervals The Pneumatic unit and the Flue gas probe are connected by two high pressure pneumatic hoses. A multi wire, protected cable connects the Transmitter to the Flue gas probe electronically. To calibrate the COe In-Line Flue gas probe AMS 3211-1500 both components O2 and CO have to be verified against a certified standard gas.

AMS 3211-1500
Measuring principle O2-COe-Sensor
Application Residual oxygen in flue gas
Construction ZrO2 sensor installed in the tip of the probe with stainless steel sintermetalfilter screwed on
Flue gas temp., max. ≤ 400 °C, short time to 450 °C
Dust content (flue gas) max. 5 Gram / Nm3, if higher : shield to protect against abrasion or separate protecting tube
Flue gas velocity max. 20 m/Sec., if higher shield to protect against abrasion or separate protecting tube
Time for pre-heating ~ 10 Minutes
T90-Time < 10 Seconds
Reaction time < 2 Seconds
Probe length 150 – 3000 mm
Material Stainless steel 1.4541, Inconel 600
Installation in the stack pointing downward
Connecting flanges DN 65 PN 16, DN 80 PN 16 (larger on request)
Protection IP 65
Reference air supply by separate pneumatic unit
Calibration gas supply by separate pneumatic unit
Weight ca. 6,5 kg
Accessories Transmitter: AMS 3220 in housing IP 65
Transmitter in twin-configuration
Pneumatic unit: GRP housing, Dimensions: 800 x 600 x 300 mm. Back-purge, Auto-calibration

  • ANALIZADORES > OXIGENO+CO
    A000154 Transmisor y Analizador AMS 5200 CEMspara el control, la vigilancia y el suministro de Sondas de gasAMspara Oxígeno (O2) 0-25% vol y COe. Interfaz serial RS232. Salida de 4-20mA. 2 relés de alarma y 1 relé de estado. Gabinete IP65. Unidad neumática y gabi ..


Opciones B2B: #Order de Compra, uso de cuenta de envio propia y compra exenta de impuesto
Opciones de Pago: Tarjeta de Credito, Tarjeta de Credito por Telefono, PAYPAL, Transferencia, Deposito, Cheque y Orden de Pago

Checkout with Paypal Visa MasterCard Amex Checkout with Wire Transfer Electronic Payment

> OXIGENO+CO :    2 Articulos encontrados.
A000154
(2774)

AMS  A000154

Transmisor y Analizador AMS 5200 CEMspara el control, la vigilancia y el suministro de Sondas de gasAMspara Oxígeno (O2) 0-25% vol y COe. Interfaz serial RS232. Salida de 4-20mA. 2 relés de alarma y 1 relé de estado. Gabinete IP65. Unidad neumática y gabinete Ex-d opcional para uso en zonasEx 1 ó 2. Sondascompatibles: AMS 3211-000 / 500 / 600 / 700 / 860 Ex. 110/240 VAC 50 o 60 Hz o 24 VDC.

A001159
(2919)

AMS  A001159

Sonda de gas AMS 3211-1600 de alta temperatura con sensor de dióxido de circón para la medición de Oxígeno (O2) y Monóxido de Carbono (COe). Tubo de Ceramica o Kanthal. IP65. Temperatura máxima: 1100 °C.