Detectores de Fuga de Gases, Analizadores, Dispositivos de Alarma y Gases de Calibracion
SKU# (4718)

ESP SAFETY  100-0003-01

$1,656.00 Dls    Tiempo de Embarque: 7 Dias
 Solicitar Info/Cotizacion
 Costo del Flete
 Descuento por volumen



ESP SAFETY 100-0003-01 (1)
  • General
  • Detalles
  • Especs
  • Relacionados
  • Literatura

Detector de flama ultravioleta ESP Safety IPES-UV para la detección de incendios de metal o de materialespirofóricos. Reconocimiento de llama y señal de alarma rápidos. 180 a 250 nanometros. Campo de visión de 90 grados. SalidasRS-485, 4-20 mA y de relé. LED de estado. A prueba de explosión. Diseñado para la Clase I, División 1, Grupo B, C y D. Incluye visor de protección, soporte de montaje de acero inoxidable y hardware.

Parte# con Opciones:        100-0003-01
Precio con Opciones:        1,656.00

Opciones:    

Gabinete
(1) Gabinete para ESP Safety IPES-UV

  Tiempo de Embarque 7 Dias  ]

ESP Safety’s Model IPES-UV Flame Detector is optimally suited for use in detecting fires of metal and pyrophoric materials. It is also ideally suited for areas where modulated infrared radiation may be present, such as hot spots on rotating electrical equipment.

IPES-UV’s advanced detection technology ensures rapid flame recognition and alarm signaling. The device is configured for sensitivity in the UV range of 180 to 250 nanometers, making the sensor “blind” to sunlight and radiation from heated objects but still able to “see” the UV radiation emitted by a flame. On detection, it transfers alarm signals to receiving control devices in control and operations rooms and to fire alarms and burglar/fire alarm systems.

Since the IPES-UV uses UV detection, it is unaffected by visible and infrared light sources, including sunlight, within its 90 degree field of view. In addition, it is not effected by gases that absorb infrared radiation which reduce the intensity of the signal.

While operating, the IPES-UV generates detector-status information via:

  • A standard RS-485 communication channel under protocol Modbus RTU
  • 4-20 mA analog output
  • Relay outputs

The IPES-UV is constructed in an explosion-proof housing for use in hazardous (classified) locations.

The type of protection is “Explosion-proof,” Class I, Division 1, Group B, C & D, and T4.

Applications
  • Drilling and production platforms
  • Shipping tankers, freighters, and other vessels
  • Fuel loading facilities
  • Refineries, bulk terminals, and tank farms
  • LNG/LPG processing and storage facilities
  • Compressor stations and pipeline facilities
  • Petrochemical, paint, and fertilizer plants
  • Power plants and gas turbine facilities
  • Transportation facilities (airports and subways)
  • Oil and gas fired boilers / furnaces
  • Aircraft hangars
Features and benefits
  • Power consumption of <3W means low power costs, protection against surges
  • Digital, analog and relay outputs provide reliable status information across a range of communication formats
  • Automatic and manual self-tests ensure system integrity and correct operation
  • Continuous monitoring of the optical path for obstruction or reduced transmission affords maximum reliability
  • Industry standard for remote alarm and fault indication
  • UV sensor configuration (peak sensivity at 180 and 250 nm wavelengths) is ideal for hydrogen and metal fire detection
  • Color status LED
  • Explosion-proof package allows for hazardous environment operation

Specifications
Electrical Characteristics
Voltage18 to 32 VDC
Power<2 W, standby
<3 W, during alarm
Analog OutputAnalog signal: 4-20 mA
Fault signal: 2 mA ± 0.1 mA
Ready signal: 4 mA ± 0.1 mA
Fire signal: 18 mA ± 0.1 mA
Test Mode: 8 mA ± 0.1 mA
RS485 OutputRS 485, Modbus RTU
Relay OutputFire:
-From terminal X3, position (3,4)
-normally open relay
-closed on fire detection
-latching/non-latching
Fault:
-From terminal X3, position (1,2)
-normally closed relay
-open on fault detection
-latching/non-latching
Operating Temperature-40°F to +185°F
(-40°C to +85°C)
Storage temperature-76°F to +185°F
(-60°C to +85°C)
HumidityUp to 95 % Relative humidity (withstands up to 100% RH for short periods)
Wiring14 AWG (2.08 mm) or 16 AWG (1.31 mm)
Shielded cable is recommended
Mechanical Characteristics
MaterialAluminum (standard); Stainless steel (optional)
Cable Entry3/4 inch -14 NPT
WeightAluminum: 5.5 lbs (2.5 kg) Stainless steel: 11 lbs (5.0 kg)
Warranty5 years

  • ACCESORIOS > SIMULADORES DE FLAMA ESP SAFETY
    120-0007 Lámpara de Prueba Doble ESP Safety ITES portatil para hacer pruebas de funcionamiento de los detectores de llama IPEssin parar susfuncionamiento. Genera radiación modulada dirigida para indicar una respuesta de la llama. 1 año de garantía. A prueba de exp ..

  • DETECTORES DE FLAMA > TRIPLE IR
    100-0017-01 Detector de flama infrarrojo ESP Safety IPES-IR3 para la detección de incendios de vapor de combustibles. Reconocimiento de llama y señal de alarma rápidos. Envía una alarma unicamente cuando 3 diferentesondasIR detectan una llama. SalidasRS-485, 4-20 mA ..

  • DETECTORES DE FLAMA > ULTRAVIOLETA/INFRARROJO
    100-0003-01 Detector de flama infrarrojo/ultravioleta ESP Safety IPES-IR/UV para la detección de incendios de aceite o productospetroquímicos. Reconocimiento de llama y señal de alarma rápidos. 180 a 250 nanometros (ultravioleta). Campo de visión de 90 grados. Salida ..


Opciones B2B: #Order de Compra, uso de cuenta de envio propia y compra exenta de impuesto
Opciones de Pago: Tarjeta de Credito, Tarjeta de Credito por Telefono, PAYPAL, Transferencia, Deposito, Cheque y Orden de Pago

Checkout with Paypal

> ULTRAVIOLETA :    1 Articulos encontrados.
40/40U_-111AF
(1501)

SPECTREX  40/40U-111AF

Detector de Flama Spectrex SharpEye 40/40U Ultravioleta. Detecta incendios provocados por gasesy combustiblesbasados en hidrocarburos, llamas invisibles de hidrógeno y fuegosprovocados por hidruros, amoniaco, silano y otroscomponentesorgánicos. Incluye 3 relés (alarma, falla y auxiliar). 4-20mA. Compatible con ModbusRS-485.

Configurar

$1,944.63 Dls