Detectores de Fuga de Gases y Flama, Analizadores, Dispositivos de Alarma y Gases de Calibracion
DETCON 967-747590-005 (1)
  • General
  • Caracteristicas
  • Especs
  • CONSUMIBLES
  • ACCESORIOS & RELACIONADOS
  • Literatura

Detector de gas electroquímico inteligente Detector de gas Detcon DM-700-Br2 para Bromo (Br2) 0-5 ppm con pantalla LED. Salidas de 4-20mA y Modbus RS-485. Gabinete de acero inoxidable 316. A prueba de agua, corrosión, vibraciones y explosiones. NEMA 4X. IP66. Clase I, Div. 1, Grupos B, C y D. Aprobado por CSA y ATEX.

Parte# con Opciones:        967-747590-005
Precio con Opciones:        Favor de solicitar precio via Email   

Opciones:    

Caja de Conexiones
(1) Caja de Conexiones para Detcon DM-700
Opciones
(2) Opciones para Detcon DM-700
Módulos de integración
(3) Módulos de integración para Detcon Series 700
Clase 1; Div 1; Grupos B, C, D – Zona I Grupo IIB+H2
Opciones de Montaje
(4) Opciones de Montaje para Detcon Series 700
Módulos Adicionales
(5) Módulos Adicionales para Detcon Series 700

  Tiempo de Embarque 3 Semanas  ]

Detcon Model 700 Series Sensors are a non-intrusive “Smart” sensors designed to detect and monitor oxygen and Toxic Gases in air using electrochemical sensor technology. The intelligent plug-in, field replaceable cell provides automatic recognition of gas type and range, and features over-sized gold-plated connections that help prevent corrosion. The Model 700’s rugged framework includes an intrinsically safe electro-polished 316 stainless steel housing with fully encapsulated electronics and dual layer surge protection. This innovative design virtually eliminates sensor failure due to water ingress, corrosion, vibration, and transient spikes. A primary feature of the Model 700 is embedded intuitive software that simplifies operator interface by guiding the user through routine calibration, configuration, and fault diagnostic functions using a built-in alpha/numeric display. The Model 700 is equipped with standard analog 4-20mA, and ModbusTM RS-485 outputs. Among its unique features is a wireless option that can be used with Detcon’s SmartWireless® product line. Additional integration options include a Remote Alarm Module (RAM), HART, and Foundation Fieldbus. Detcon’s toxic gas and oxygen sensors have a long shelf life and are supported by an industry-leading warranty.

Features Failsafe User-Friendly Interface
  • LED Display (With Antiglare Cover)
  • Full Text Display Method
  • Non-intrusive Interface
  • Auto Zero/Auto Span
  • Pre-emptive Fault Diagnostics
Environmentally Bulletproof
  • Electropolished 316SS Construction
  • 100% Epoxy Encapsulated Circuitry
  • Bulletproof I/O Protection
  • Water-Proof, Corrosion-Proof, Vibration-Proof
Modular and Serviceable
  • Modular Design
  • Plug and Play Components
  • Quick Thread Release (For Sensor Replacement)
  • Integral Calibration Port
Applications
  • Oil & Gas
  • Chemical Plants
  • Food and Beverage
  • Steel Mills
  • Pulp and Paper
  • Refineries
  • Wastewater Treatment Plants
  • Utilities

System Specifications
Sensor TypeContinuous diffusion/adsorption
3-electrode electrochemical cell
Plug-in field replaceable Type
Measurement Range0-5 ppm
Accuracy/Repeatability±2% FS
Response/Clearing TimeT90≤60 seconds
OutputsLinear 4-20 mA DC
RS-485 MODBUS-RTU
Electrical ClassificationExplosion proof
CSA and US (NRTL)
Class I, Division 1, Groups B, C, D (Tamb = -40°C to +50°C)
Class I, Zone 1, Group IIC
ATEX
II 2 G Ex d ib IIB + H2 T4 GB
Ingress ProtectionNEMA 4X, IP66
Safety ApprovalsCCSAUS
ATEX
CE Marking
SIL2 Certified to IEC 61508
Environmental Specifications
Operating Temperature Range-4 to 122oF/-20 to 50oC
Storage Temperature Range-31 to 131oF/-35 to 55oC
Operating Humidity Range15-95% RH non-condensing
Mechanical Specifications
Dimensions7"H x 2.2" Dia.; 178mmH x 65mm Dia. (sensor assembly only)
11"H x 6.1"W x 3.75"D; 280mmH x 155mmW x 96mmD (with junction box)
Mechanical Connection:
Mounting holes (J-box) 5.5"; 140mm center to center
Weight2 lbs; 0.907kg (sensor only)
6 lbs; 2.72kg (w/aluminum j-box)
9 lbs; 4.08kg (w/stainless steel j-box)
Electrical Specifications
Power Input11-30 VDC
Power ConsumptionNormal operation = 30mA @24V (<0.75 watt)
Maximum = 50mA @24V (1.2 watts)
Inrush Current500mA @ 24V (typical)
RFI/EMI ProtectionComplies with EN50270
Analog OutputLinear 4-20mA DC (1,000 ohms max loop load @ 24VDC)
0mA: All Fault Diagnostics
2mA: In-Calibration
4-20mA: 0-100% full-scale
22mA: Over-range condition
Serial RS-485 OutputRS-485 ModbusTM RTU
Baud Rate (optional)9600 BPS (9600,N,8,1 Half Duplex)
Status Indicators4-digit LED display with gas concentration
Full-script menu prompts for AutoSpan
Set-up Options, and Fault Reporting
Faults MonitoredLoop, Input Voltage, Missing Sensor, Zero, Processor, Memory, Calibration
Cable RequirementsPower/Analog
3-wire shielded cable
Maximum distance is 13,300 feet with 14 AWG
Serial Output
2-wire twisted-pair with ground, shielded communication cable specifically for use with RS-485 installations
Maximum distance is 4,000 feet to last sensor
I/O ProtectionOver-voltage, Miswiring, EMI/RFI Immunity
Export Info
Fabricado enUnited States
Codigo Arancelario9027102000

  • MONTAJE > DETCON
    S927-555500-100 Repuesto ITM (Módulo transmisor inteligente) para Detcon DM-700-EC (electroquímico) para SO2, C2H2, AsH3, Br2, C4H6, CO, CL2, CLO2, B2H6, C2H5OH, C2H5SH, C2H4, C2H4O, F2, CH2O, H2, HBr,m HCL, HCN ..
  • SENSORES DE REPUESTO > DETCON
    377-747501-005 Sensor Detcon de Bromo (Br2) para DM-700-Br2 ..

  • CALIBRACION > DETCON
    943-000006-132 Adaptador de calibración Detcon para series FP, IR, DM, O2 ..


Opciones B2B: #Order de Compra, uso de cuenta de envio propia y compra exenta de impuesto
Opciones de Pago: Tarjeta de Credito, Tarjeta de Credito por Telefono, PAYPAL, Transferencia, Deposito, Cheque y Orden de Pago

Checkout with Paypal Visa MasterCard Amex Checkout with Wire Transfer Electronic Payment

> BROMO :    1 Articulos encontrados.
961-750026-005G
(6351)

DETCON  961-750026-005G

Detector de gas Detcon DM-100-Br2 con sensor electroquímico para Bromo (Br2) 0-5ppm con pantalla con alimentación de lazo (opcional). Salida de 4-20 mA. Incluye dispositivos electrónicos inteligentes, interfaz de operador no intrusiva y detector de fallas. Gabinete de acero inoxidable 316 (opcional). NPT 3/4". Intrínsecamente seguro (XP). Para Clase I, Div. 1, Grupos A, B, C y D.