Detectores de Fuga de Gases y Flama, Analizadores, Dispositivos de Alarma y Gases de Calibracion
SKU# (6155)

DELPHIAN  364-455-01-365-722-11050

$681.60 Dls    Tiempo de Embarque: 2 Dias
 Solicitar Info/Cotizacion
 Costo del Flete
 Descuento por volumen



DELPHIAN 364-455-01-365-722-11050 (1)
  • General
  • Caracteristicas
  • Especs
  • Literatura

Detector de gas electroquímico Delphian GazTell de punto fijo para Mercaptano (TBM) 0-50 o 0-25ppm. Salida de 4-20mA. Salida Modbus RTU y relés de alarma opcionales. Aprobado por SIL2. Adecuado para Clase I Div 1 y 2 Grupos C, D.

Parte# con Opciones:        364-455-01-365-722-11050
Precio con Opciones:        681.60

Opciones:    

Rango
(1) Rango para Delphian GazTell TBM
Pantalla Remota
(2) Pantalla Remota para Delphian Gaz Tell IR/EC via RS-485
Relés de Alarma
(3) Módulo de alarma local simple para Delphian Gaz Tell IR
Módulo de Comunicaciones
(4) Módulo de Comunicaciones para Delphian Gaz Tell IR
Opciones de Montaje
(5) Opciones de Montaje para Delphian GazTell Electroquímico
Adaptadores
(6) Adaptadores para Delphian GazTell Electroquímico
Protector contra salpicaduras
(7) Protector contra salpicaduras para Delphian GazTell

  Tiempo de Embarque 2 Dias  ]

Hassle free safety:
  • Simple to use and install
  • Shock & vibration resistant
  • Low power consumption
  • Checks itself every second
  • Plain English displays
  • Tough
  • Reliable
  • Affordable
  • Accurate
THE DETECTOR HEAD

The GazTell detector head for electrochemical cells can be used alone or with the optional modules.

  • The small size (5”L x 2”W) makes it inconspicuous and allows placement in tight areas.
  • User-friendly, alpha-numeric LED display with understandable instructions and prompts.
  • Automatically recognizes the sensor cell with no configuration necessary.
  • Scrolls gas type every few seconds.
  • Low maintenance and low cost of ownership. The detector head logs and will display the last time it was calibrated.
  • Connects directly to conduit eliminating the need for expensive and bulky junction boxes.
  • Smart Sensor saves operator time and money. The sensor knows the highest reading since last calibration, the number of days since last calibration, how long the detector head has been in service, the percentage of life remaining in the sensor and highest/lowest temperatures observed during operation. It checks itself and its vital functions continuously.
  • Power consumption is very low. Even at its maximum power consumption (with the display at its brightest), the detector head uses only 77mA @ 24VDC.
OPTIONAL SLAM
Remote Relay Module
  • Set alarm levels without software, using simple jumper selection.
  • The module can be placed anywhere relays are needed.
  • Flexible design allows the relays to be placed next to the functions they operate.
  • The relay module has robust relays rated at 6 amp@120 volt relays for Fail, Low and High Alarms, so auxiliary relays are often not needed. Alarm relays can be latching or non-latching, energized or de-energized, normally open or closed. A 5 second alarm delay can be turned on to avoid false alarms.
  • FM Approvals tested the SLAM module for operation at -4 oF to 140 oF (-20 oC to +60 oC).
OPTIONAL EXMO
Remote Display Module

The EXMO communicates directly with the detector head and mimics its display. If the detector head is located remotely high or low, or in a difficult-to-calibrate place, locating the EXMO in an accessible position gives immediate access to the detector head’s sensor. It displays everything the detector head displays. It gives control via bi-directional RS-485 communication.

Remote calibration has never been so easy.

The small extension module has the same alpha numeric LED displays and color coded operation as the remotely placed detector head.

  • Check the sensor before entering a dangerous area.
  • Take the sensor online or offline
  • Calibrate
  • Cancel calibration

SPECIFICATIONS
DimensionsDetector Head: 5"L x 2"W
EXMO, SLAM & COMO: (each) 6"L x 3.5"W x 2"H
Shipping Weight Detector Head: .875 lbs (.4 kg)
EXMO, SLAM & COMO: (each) 1.25 lbs (.6 kg)
Power: Detector Head: 77 mA max
EXMO: 16mA max
SLAM: 56 mA max
COMO: 35 mA max
Operating Voltage Nominally 12-42 VDC
Output Signal Range 4-20mA or 1-5 mA (user selectable, 4 - 20mA is default). Modbus RTU available as an option.
Output is linear and proportional to the gas scale.
Load (maximum resistance) 300 Ohms
Measurement Ranges ppm according to toxic gas electrochemical cell and % by volume for oxygen.
Temperature Range Cell Storage: +32 oF (0 oC) to +68 oF (+20 oC)
The detector head: (depending upon cell installed)
-20 oC (-4 oF) to +70 oC (+158 oF)
The EXMO/SLAM/COMO:
-20 oC (-4 oF) to +60 oC (+140 oF)
Pressure The operating pressure range for toxic cells is normally ambient +/-10%
Mean Time Between Failures (MTBF@70F) 8 years (electronics)
SLAM Relays 6 amps@120 volts
SLAM Response Time Less than a second from the time the detector head sees sufficient gas to trigger an alarm to the relay operating.
EXMO Response Time Less than a second from the time the detector head sees gas to the EXMO displaying that gas concentration.
Detector Head RFI/EMI Immunity Less than 1% of full scale change with 5w transceiver keyed within three feet. RFI/EMI Protection complies with EN50270, EN61000-6-4, ISA/IEC 6001-4-3
Area Hazard Classification: Class I, Divisions 1 & 2, Groups C, D
SIL (Safety Integrity Level) SIL 2
Warranty Detector Head, SLAM, EXMO and COMO: two years from date of shipment.
Cell: one year from date of shipment.
Export Info
Fabricado enUnited States
Codigo Arancelario9027102000


Opciones B2B: #Order de Compra, uso de cuenta de envio propia y compra exenta de impuesto
Opciones de Pago: Tarjeta de Credito, Tarjeta de Credito por Telefono, PAYPAL, Transferencia, Deposito, Cheque y Orden de Pago

Checkout with Paypal

> MERCAPTANO :    5 Articulos encontrados.
GM/EC-01-30-11
(396)

GDS  GM/EC-01-30-11

Detector de Gas GDS GASMAX/EC para Mercaptano (TBM) con rango 0-14 ppm/0-50 mg/m3, con cabeza sensora local de acero inoxidable a prueba de explosión (XP). Tiene Transmisor de 2 hilosa 4-20 mA.

Configurar

$1,760.00 Dls
GMII-01-030-11/00-000-00/0-0
(402)

GDS  GMII-01-030-11/00-000-00/0-0

Detector de Gas GASMAX II con cabeza sensora de acero inoxidable configurado para Mercaptano (TBM) con rango 0-14 ppm/0-50 mg/m3. Transmisor de salida de 4-20mA. Trae como opción tarjeta de relés de alarma (3x 5A SPDT) y ModbusRS-485.

Configurar

$1,945.00 Dls
GMCX-01-30-11/00-00-00/0
(3304)

GDS  GMCX-01-30-11/00-00-00/0

Detector de gas GDS GASMAX CX de 3 hilos con cabeza sensora local de acero inoxidable configurado para Mercaptano (TBM) con rango de 0-15 hasta 0-30ppm, pantalla a color QVGA TFT, salida de 4-20 mA, puerto Ethernet ModbusTCP RJ-45 con servidor web. Tablero de relés de alarma (4x 5A SPDT) y RTU RS-485 Modbusopcionales. Certificación CSA para Clase I, Div 1, Grupos B, C, D.

Configurar

$2,420.00 Dls
GM/TX/01-30-11/00-00-00/1-0900
(3440)

GDS  GM/TX/01-30-11/00-00-00/1-0900

Monitor de gas autónomo GDS GASMAX TX inalámbrico con cabeza sensora de acero inoxidable y sensor integrado configurado para Mercaptano (TBM) con rango de 0-15 hasta 0-30 ppm. Alimentado por batería. Modem integrado de 900 MHz o 2,4 GHz. Pantalla LCD y gabinete de aluminio. Aprobado por FCC e IC.

Configurar

$2,705.00 Dls
500281-20
(2949)

AXEL-SEMRAU  500281-20

Analizador Axel-Semrau OH+ ODOR Plus portátil para Mercaptano (TBM) con sensor electroquímico. Instrumento de medición para un rápido análisisde la concentración de odorante. Batería NiMH y pantalla LCD. Alarmassonora y visual. Incluye tapa de medición, manguera con Swagelok de 1/8, Rotámetro, gabinete, cargador de batería, fuente de alimentación, adaptador y licencia de software. Aprobado por ATEX.

Configurar

$7,155.87 Dls