SIMPLEX TYCO   4906-9102

4906-9102   
Favor de solicitar precio via Email   

• Intensity is selectable as 15, 30, 75, or 110 candela with visible selection jumper secured behind strobe housing
• Operation is compatible with ADA requirements (refer to Installation Reference, Surface or Semi-Flush Wall Mounting)
• Polarized input allows connection to compatible reverse polarity, supervised notification appliance circuit (NAC)
• Regulated circuit design ensures consistent flash output and provides controlled inrush current
• Rugged, high impact, flame retardant thermoplastic housings are available in red or white with clear lens
• Listed to UL 1971 and ULC S526
• NEMA 1 rated. See Product Selection for more information

• Simplex fire alarm control panels with NACs selected to provide strobe synchronization or SmartSync two-wire control
• 4009 IDNet NAC Extenders
• Separate strobe Synchronization Modules that are available for Class B or Class A operation
• Separate SmartSync Control Modules (SCMs) that provide Class B or Class A output from conventional NAC inputs

• Rear of housing does not extend into box
• Wall mount strobes easily mount to single gang, double gang, or 4-inch square outlet box
• Ceiling mount strobes mount to single gang boxes

• Wall mount strobe adapters are available to cover surface mounted electrical boxes and to adapt to 2975-9145 boxes
• UL listed red wire guards are available for wall or ceiling mount strobes*

Multi-Candela TrueAlert synchronized strobes provide convenient installation to standard electrical boxes. The enclosure designs are both impact and vandal resistant and provide a convenient strobe intensity selection. Since each model can be selected for intensity output, on-site model inventory is minimized and changes encountered during construction can be easily accommodated.

Ceiling mount strobes install using standard single gang electrical boxes. Color choice is determined by model number.

Proper selection of visible notification is dependent on occupancy, location, local codes, and proper applications of: the National Fire Alarm Code (NFPA 72), ANSI A117.1; the appropriate model building code: BOCA, ICBO, or SBCCI; and the application guidelines of the Americans with Disabilities Act (ADA).

Multiple Strobes. When multiple strobes and their reflections can be seen from one location, synchronized flashes reduce the probability of photo-sensitive reactions as well as the annoyance and possible distraction of random flashing. These multi-candela strobes are synchronized over a two-wire circuit when connected to compatible NACs, to compatible Synchronized Flash Modules, or to SmartSync Control Modules.

Some applications desire the audible notification appliances to be capable of being silenced before the alarm condition is reset (on-until- silenced) while the visible notification appliances are kept activated until the alarm condition is reset (on-until-reset). SmartSync operation mode provides this function using a single circuit (two-wire operation).