Ams A001700 | Oxigeno | Sondas | Detectoresymedidores
Detectores de Fuga de Gases y Flama, Analizadores, Dispositivos de Alarma y Gases de Calibracion

AMS   A001700

AMS A001700
  • DESCRIPCION
  • CARACTERISTICAS
  • ESPECIFICACIONES
  • LITERATURA
Sonda de gas AMS 3211-600 de alta temperatura con sensor de dióxido de circón para la medición de Oxígeno (O2). Tubo de cerámica, Kanthal. IP65. Temperatura máxima: 1700 °C.

A001700
Favor de solicitar precio via Email   

Tubo de muestreo de KANTHAL
Tubo de muestreo de Ceramica
Unidad neumática
GFC Housing with window with built-in: Pressure reduction for reference air, Flowmeter with needle valve for reference air / cal. Gas, valves for manual actuation between the gases
Unidad neumática
GFC Housing with window with built-in: Pressure reduction for reference air, Flowmeter with needle valve for reference air / cal. Gas, valves for manual actuation between the gases

   4 Semanas  ]


The Application:

The Zircon dioxide sensor of the High temperature Flue gas probe AMS 3211-600 is installed in the flange of the probe. To supply the flue gas to the Zircon dioxide sensor the probe is equipped with a pneumatic pump. The Flue gas probe AMS 3211-600 can be used for the measurement of Oxygen in flue gases from gaseous, liquid and solid fuels and biomass. In Applications with solid fuels and biomass the Standard In-Line Flue gas probe AMS 3211-600 is equipped with an additional Stainless steel tube to protect the probe against abrasion. In combination with the Transmitter AMS 3220 the High temperature Flue gas probe AMS 3211-600 is TÜV-certified according European and German environmental regulations and fulfils the requirements for QAL 1 according EN 14181 and EN ISO 14956.

The Measuring principle:

All AMS Flue gas probes are equipped with Zircon dioxide sensors with Platinum electrodes which distinguish themselves by a long lifetime in the process. The Zircon dioxide sensor of the High temperature Flue gas probe AMS 3211-600 is installed in the flange of the probe to reduce the thermal load on the sensor. To supply the flue gas to the Zircon dioxide sensor the probe is equipped with a pneumatic pump. To operate the pneumatic pump of the Flue gas probe it has to be connected to a continuous instrument air supply with a pressure of 2 – 6 bar (g). Due to the unique design the Flue gas probe AMS 3211-600 can be operated in temperatures up to 1700 °C. The pneumatic suction of the flue gas allows the use of the High temperature Flue gas probe AMS 3211-600 even in ducts with large diameters. To replace the Zircon dioxide sensor of the High temperature Flue gas probe AMS 3211-600 the probe does not have to be dismounted from the duct.

The Measuring system:

The High temperature Flue gas probe AMS 3211-600 can be operated with the Transmitters AMS 3220 or AMS 5200 and a Pneumatic unit. The Pneumatic unit is fitted with all necessary regulation and control instruments for the high-pressure air supply for the pneumatic pump. The power supply of the Flue gas probe and the Transmitter is also installed in the Pneumatic unit. The flue gas probe, the Transmitter and the Pneumatic unit are manufactured according to the protection class IP 65 for General Applications. Since all AMS Flue gas probes are manufactured according to customer specification, the selection of the probe material as well as dimensions and sizes can be made fitting to any application. Optional the High temperature Flue gas probe AMS 3211-600 can be equipped with time controlled back purge for high dust applications and with Auto-calibration for the automatic, time controlled calibration. To replace an already existing continuous oxygen measuring system the High temperature Flue gas probe AMS 3211-600 can be fitted with all flange sizes both in DIN and ANSI dimensions.

AMS 3211-600
Measuring principle ZrO2 sensor with Pt-electrodes
Application Residual oxygen in flue gas
Construction ZrO2 sensor installed in the sensor flange with pneumatic pump
Flue gas temp., max. 1700 °C
Dust content (flue gas) max. 5 Gram/Nm3
Flue gas velocity < 20 m/s
Time for pre-heating ~ 10 Minutes
T90-Time < 20 Seconds
Reaction time < 5 Seconds
Probe length 150 – 1000 mm
Connecting flanges DN 80 PN 16, DN 100 PN 16
Material Ceramics, Kanthal
Installation in the stack straight down
Protection IP 65
Reference air supply by separate pneumatic unit
Calibration gas supply by separate pneumatic unit
Weight ca. 6,5 kg
Accessories Transmitter: AMS 5200 / AMS 3220 in housing IP 65
Pneumatic unit: GRP housing, Dimensions: 600 x 600 x 200 mm / 800 x 600 x 300 mm. Auto-calibration optional

 Solicitar Info/Cotizacion
 Descuento en Reventa y Vol
 Costo del Flete

Opciones B2B: #Order de Compra, uso de cuenta de envio propia y compra exenta de impuesto
Opciones de Pago: Tarjeta de Credito, Tarjeta de Credito por Telefono, PAYPAL, Transferencia, Deposito, Cheque y Orden de Pago

Checkout with Paypal Visa MasterCard Amex Checkout with Wire Transfer Electronic Payment

> ACCESORIOS - RELACIONADOS - CONSUMIBLES :    1 Articulos encontrados.
A000154
(2774)

AMS  A000154

Transmisor y Analizador AMS 5200 CEMspara el control, la vigilancia y el suministro de Sondas de gasAMspara Oxígeno (O2) 0-25% vol y COe. Interfaz serial RS232. Salida de 4-20mA. 2 relés de alarma y 1 relé de estado. Gabinete IP65. Unidad neumática y gabinete Ex-d opcional para uso en zonasEx 1 ó 2. Sondascompatibles: AMS 3211-000 / 500 / 600 / 700 / 860 Ex. 110/240 VAC 50 o 60 Hz o 24 VDC.

> OXIGENO :    4 Articulos encontrados.
A000249
(2954)

AMS  A000249

Sonda de gas AMS 3211-000 con ZrO2 instalado en el flujo a través de celda. Para instalaciones en gabinetes de control EExp usando la conexión eléctrica del cliente. Conductoresflotantessin caja de terminales.

A001694
(2775)

AMS  A001694

Sonda de gas AMS 3211-500 estándar en línea con sensor de dióxido de circón para la medición de Oxígeno (O2). Tubo de acero inoxidable. IP65. Temperatura máxima: 550 °C.

A000352
(2916)

AMS  A000352

Sonda de gas AMS 3211-700 de alta temperatura con sensor de dióxido de circón para la medición de Oxígeno (O2). Tubo de Kanthal. IP65. Temperatura máxima: 1400 °C.

A000636
(2917)

AMS  A000636

Sonda de gas AMS 3211-860-150 en línea con sensor de dióxido de circón para la medición de Oxígeno (O2). Tubo de acero inoxidable. IP65. Temperatura máxima: 500 °C. Para uso en ZonasEx 1 y 2.

Aviso de Cookies

Esta tienda en línea utiliza cookies para recordar a los usuarios, permitir el pago y recopilar información agregada que nos permite analizar los patrones de tráfico en nuestro sitio (no se almacena información personal). Para más información puedes leer nuestra Política de Privacidad.